It is impossible to imagine our lives without a hot water system wollongong during winter. While we all know how to use a water heater, not many people are involved in maintaining this vital home appliance. An average water heater should last between 8-12 years. However, most people end up spending money to repair their geysers before this time. Here are seven tips to extend the life of your water heater.

1. When the hot water system is not in use, turn it off

You must turn the hot water system wollongong off when you’re done with it. A storage tank for a water heater is made from stainless steel/mild steel with polymer or a clear line coating, and has an additional tank. The system’s heating elements will heat the water as soon as it detects a drop in temperature. This will increase the use of geysers as well as power consumption.

You should be concerned about your water becoming cold. The storage tank must have the ability to keep the water temperature at the desired temperature for at least 4-5 hours after the heater has been turned off.

2. Insulate your water heater

Insulating your hot water wollongong pipes can increase its energy efficiency and temperature by 2 to 4 degrees. Although it won’t increase the lifespan of your water heater this will make it more efficient and help you use your appliance more efficiently. If you notice an increase in your electricity bills, this is something you should consider.

3. When the water heater is not being used, empty it.

It is best to not store water in a storage geyser for too long. This can lead to bacteria growth in stagnant water, and cause bad odours. It is best to empty the hot water wollongong tanks when you’re not using them, especially if your trip involves travelling.

4. Repair damaged parts in your water heater.

The best way to maintain your system is to make sure there isn’t any limestone in the tank. It is your water heater’s greatest enemy. It can cause damage to the valve and other heating components of your geyser. It is important to keep the heating elements clean before limescale renders them useless.

5. Regular maintenance is important for your system.

It is better to make regular servicing of your hot water system than scrolling through water heater repair tips. Regular checks can help prevent irreversible damage.

  1. Learn how to use your water heater the most efficiently possible
  2. Make sure to write down all information regarding your hot water system, including the model number and the type.

6. Avoid using the water heater when there are voltage fluctuations

The hot water system, just like the television or refrigerator, requires constant electricity supply when it is turned on. The water heater may not function smoothly if the voltage fluctuates. Make sure your geyser’s voltage supply does not exceed the recommended levels.

7. You can use a water softener.

Your water heater’s performance can be affected by the water quality in your home. Hard water is water that contains high levels of calcium or magnesium. Mineral deposits build up at the bottom of heaters and can cause them to last less time. Install a water softener to prevent this. This will filter out minerals that can make water hard and allow only soft water through your pipes.


If you see any of these signs on your water heater, it is time to replace it.

  1. Ageing: Although it may seem obvious, this is often overlooked. It’s time for a replacement if your geyser is in good condition after 12 years. Inefficient functioning may result from the minerals in your water.
  2. Hot water may smell metallic: This is due to the metallic elements in the geyser flagging off and mixing with water.
  3. Increased repair costs: A geyser that is constantly in need of repairs is a sign it’s time to replace the water heater.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *